en
cnWhen it comes to cleaning the bed, can a fully automatic washing machine solve all the problems? Of course not! Printing, lifting, embroidering bedding, and cleaning methods are different." There are also many misunderstandings in bedding care. Today, Senlan Home Textiles and bedding join us to share with you the relevant knowledge of various bedding care. What is it?
1. The printing bed care cannot be bleached.
Detergents containing bleaching ingredients are prohibited. They have strong detergency against bleaching agents and can easily cause color discoloration of printed products.
Second, don't soak for a long time.
It should not be soaked for a long time (generally not more than 1 hour). Soaking in water for a long time will not only damage the color of the overprint, but also cause the fabric to expand and deform and shorten the service life if the soaking time is too long.
2. Do not expose to the sun.
Prolonged exposure to the sun can discolor bedding and make fabrics brittle.
Jacquard, embroidered bed care.
1) Open the inside of the jacquard and embroidered quilt cover first, turn the jacquard and embroidered side inside, and then put it into the washing machine. Be sure to use a gentle washing method to prevent the embroidery thread from falling off, spinning, and even hooking.
2) When washing embroidered bedding, no matter how big the capacity of your washing machine is, you can only wash this bedding separately each time. Do not place it in other clothes to avoid entanglement of buttons or metal products of other clothes. Before cleaning products with decorative accessories, be sure to remove the lace, trim, etc. to avoid damage.
3) Before drying the embroidered quilt cover, the quilt cover should be flattened and then aired, and families with conditions should also avoid drying it. Because the embroidery ribbon is easily deformed during the drying process, it is not beautiful. During the ironing process, pay attention to the hotbed with lower temperature.
Several major misunderstandings in bedding cleaning care.
-2.jpg?imageView2/2/w/325/h/325/format/jpg/q/75)
Alkaline detergent or 84 disinfectant to accelerate fading.
Many facial cleansers say that they have a strong decontamination effect, but to achieve a super decontamination effect, there will be too much alkaline substances in the facial cleanser; if you choose a strong decontamination effect, it is definitely not a neutral detergent. , Even if it is a neutral detergent, it should be used with caution, otherwise it will easily fade.
Some people like to use 84 detergent to clean the bed, which directly leads to large areas of yellowing or fading. Because 84 disinfectant is a strong alkaline substance, it is corrosive to a certain extent. In addition to sanitizing dirt, it also whitens fabrics.
Some people also drop the detergent directly on the fabric when washing the bedding, and then wash it with water. This method is very wrong, even if it is neutral, it will produce a certain degree of corrosiveness. This is dripped on the fabric, and after the water is sufficiently diluted, a chemical reaction occurs locally on the fabric, resulting in fading or yellowing of the fabric.
As a result, many times we see fabrics fade, turn yellow, or white or spot yellow.
Strong and durable washes only make the fabric thinner.
When I am busy, it usually takes about a month to wash the bed. I am worried that it will not be clean, so I usually choose to wash it more than once. This method is not advisable!
With the daily necessities such as daily cotton, tencel, hemp silk, fluff, bamboo fiber, polyester-cotton and other daily necessities gradually become bed fabrics, and its water absorption, strength, cohesion, fibrillation, etc. are all used in the bed.
Such as: Tencel, bamboo fiber, modal and other fabrics are smooth, the fiber cohesion is poor, the degree of fibrillation is high, the wetting force is low, the washing time is long, and is affected by mechanical strength, resulting in thin edges at the stitching of the fabric The phenomenon of (washing and breaking), especially the mats, is more serious.
Therefore, it is best to control the laundry time to about 40 minutes. If conditions permit, it is best to choose hand washing or washing with a laundry bag. Cloth also has a fibrosis problem: pilling! The original fabric is smooth, and the fibers begin to fluff, entwining each other into balls of hair.
Heat does not remove stains, it only reinforces them.
Many people think that high temperature is a method of descaling, but you are wrong; if a lot of dirt is cleaned with high temperature without knowing what the substance is, it will cause permanent dirt and can never be cleaned. If you sweat, milk, blood and other substances, be sure not to use hot water.
Excessive sunburn will only speed up the staining time.
When washing the bedding, the older generation will say: wash the bed today, the sun will shine! It seemed that only the sun came out, and it was time to wash the bed, but this idea was wrong.
Different from its material, it is mainly pure cotton cloth, which is easy to cause fading (whitening and yellowing) and increased shrinkage due to exposure to the sun (because pure cotton cloth has good water absorption, and it is suddenly dried by high heat, which can easily lead to shrinkage); more water absorption Strong substances, such as tencel, modal, hemp, etc.; in addition, silk is easy to yellow and become brittle when exposed to the sun.
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
