en
cnOn rainy days, the rainy season will make the quilt soak through, and it is really uncomfortable to be covered by the wet quilt, so how can we prevent the quilt from getting wet? Today I will teach you a few tricks.
The first: intermittent ventilation.
The main purpose of ventilation is to keep the room from getting wet. The wet quilt in the room will also become damp. We need to open all the doors and windows in the room from time to time to accelerate the evaporation of indoor moisture. Be careful when opening the windows. Don't open the windows just because the temperature is high at noon. In fact, the best time is the afternoon and evening.
Second: Lime absorbs moisture.
Maybe someone knows that lime absorbs water very well, so we can buy quicklime in every corner of the room, and if it feels ugly, we can wrap the lime in a bag. According to research, one kilogram of quicklime can absorb about 0.3 kilograms of moisture in the air, and the effect is not bad.
Third: sun quilt on a sunny day.
The weather is getting warmer and warmer. When the weather is fine, take out the quilt from time to time and let it dry in the sun for about three hours to prevent the quilt from getting wet. And it will kill bacteria and mites in the sun, which is a very economical and easy-to-use moisture-proof method.
Winter quilt moisture-proof method:
1. It is difficult to see sunny days in winter, so if there is sunshine, it is best to take the quilt to dry in the sun. It can not only kill the harmful organisms on the bed, but also make the bedding more comfortable and fluffy, and the sleep is more comfortable. When drying the quilt, first disassemble the quilt and dry it to ensure that it is perfectly irradiated by the sun. Remember to tap the quilt hard to shake off the dirt on it. In the process of drying the quilt, it is best to change it once or twice to ensure sufficient sunlight.
2. Drying equipment adopts drying bag and heating furnace. The utility model adopts a special process drying bag to directly enter the high temperature air pressure into the fiber fabric. It makes the hot air flow rapidly between the fibrous tissues, and the damp, mildewed and dirty air is continuously introduced by the fresh, high-temperature and dry air. At first, the fibrous tissues formed by wet mold are extended, dried and soaked. , fluffy.
3. Add a moisture-proof thing between the bed board and the quilt, and put it in a place where the bed board is more prone to moisture. After the quilt is damp, you can bask in the sun. However, if the bed board is damp, all the bedding will be damp. At this time, a layer of moisture-proof material can be added in the middle, such as laying a layer of film, and then laying a layer of palm pad, such as plastic film, to reduce the damp area.
4. Generally, air conditioners have dehumidification functions, but the dehumidification speed of air conditioners is slightly slower. It usually takes two or three hours, and it also makes indoor people feel cold. If you are not satisfied with the dehumidification effect of air conditioners, you can also use a dehumidifier. The effect is faster, but Power consumption is high.
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
-2.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
.jpg?imageView2/2/w/326/h/326/format/jpg/q/75)
